Copper Sulfate Crystals 50lb Bag (SMALL CRYSTAL) EPA

COPPER SULFATE SMALL
CRYSTALS–EPA LABEL–50 Pound Bag
CONTAINS:
Copper Sulfate (Pentahydrate) 99%, Copper as metallic 25.2%. 
(Quimag Brand)
EPA EST NUMBER: 073385-MEX-001
WE DO NOT SHIP TO NEW YORK STATE
Controls algae in ponds, plant root growth in sewer lines,
Fungi and Bacteria growth on your plants
RATE:
Algae:
APPLICATION
RATES FOR PONDS AND LAKES:
Apply Copper Sulfate
crystals at a rate of 2-3 lbs. per acre-foot of water. An acre-foot is 43,560
square feet in area x 1 foot deep. Put the crystals in a porous bag and drag it
through the water until the crystals dissolve. Use an empty milk jug as a float
to keep the bag near the surface. Copper Sulfate can also be applied by just
broadcasting over the water and letting it sink. Apply in early spring prior to
formation of matted growth. Chemical treatment works best when the water
temperature is between 60°F and 80°F and algae clumps are broken up during
chemical application. Avoid treating when the water temperature is above 80°F
and treat only 1/4 to 1/3 of the vegetation at a time to prevent oxygen
depletion and a possible fish kill.
APPLICATION RATES FOR WATER
TANKS AND FOUNTAINS:
Add Copper Sulfate 
at the rate of 1/8 teaspoon per 100 gallons of water to kill existing algae. It
should then be mechanically removed. Cover or shade the tanks to help slow
algae growth.
Root Control:
Step 1
Measure out about one-half cup of medium sized Copper Sulfate
crystals. Pour the crystals into the commode or toilet stool. Flush the
toilet.
Step 2
Repeat this procedure 2 or 3 more times.  Flush the
toilet several more times to make sure the crystals are carried outside of your
home and into the sewer line.
Step 3
Observe the flow of your toilet for the next several days. Copper
Sulfate does not work overnight. It requires several days to several weeks to
kill the roots and it may take even longer for the dead roots to decay and
break away, thereby clearing the sewer line and restoring proper flow from your
toilet.
Step 4
Repeat the procedure every three to four months using smaller
amounts of Copper Sulfate to prevent the roots from growing back.
Tips
Tree roots that come in contact
with a Copper Sulfate solution will only absorb the copper for a short
distance into the root system, effectively killing the root at the site
without damaging the tree or shrub.
Copper Sulfate has also been
used in homes with septic systems without harming the bacterial action of
the tanks.
Do not pour Copper Sulfate
crystals into a sink drain or tub trap. Copper Sulfate will erode the
light-weight metal pipes and cause leaks.
(Sold
in California under Pesticide Broker License #40217)
Delivered in a box by FedEx ground just days after you order!!